NCT-30x
from phase A
one transmitter
Three-Phase Smart Current TransformerNCT-30x · Three-phase current monitoring
Three split-core clamps and one compact transmitter measure all three phases at once. It clips on without switching off, powers itself from phase A, and reports every minute with real-time alarms.
Part of our energy monitoring solutions, delivered as a SolaaS subscription or a PaaS platform licence. Book a demo →
All three phases, one clip-on kit
Phase balance you can see
Current on L1, L2 and L3 side by side, so imbalance and overloads stand out immediately.
Illustrative chart of live load per channel
Three phases together
- Three split-core clamps
- One compact transmitter
- Optional energy reporting
Self-powered
Powers itself from phase A, with 5 V USB for very low currents.
Choose your model
NCT-303 (300 A), NCT-305 (500 A) and NCT-310 (1,000 A) for sub-boards up to main incomers.
Safe installation
3 kV insulation and clip-on clamps, with no need to switch off.
Where it is used
Main incomers covered
Monitor floor feeders and main incomers with a single kit per board.
What you monitor
- Phase currents
- Phase imbalance
- Peak demand
What you get
- Capacity planning
- Lower peak charges
- Imbalance alerts
Protect your biggest loads
Watch three-phase machines and plant for overloads and imbalance.
What you monitor
- Machine currents
- Imbalance
- Overload events
What you get
- Early fault warning
- Fewer trips
- Maintenance planning
Know how hard plant works
Track chillers, AHUs and pump sets on all three phases.
What you monitor
- Running current
- Run time
- Phase balance
What you get
- Efficiency insight
- Fault warning
- Energy breakdown
Readings become decisions
Every reading lands in IoTRICs as live energy dashboards, reports and alarms. We can also pass the data to your own platform through an API.
Consumption dashboards
Live and historical use per circuit or load.
Cost allocation
Split energy cost by tenant, area or system.
Overload alarms
Alerts before a breaker trips.
After-hours waste
See what runs when nobody is there.
Full specifications are in the datasheet
Model options, measurement, wireless and installation details, all in one PDF.
Need drawings or a sample report? Ask our team
Monitoring three-phase loads?
Tell us about your boards. We’ll design the metering solution and show it live in IoTRICs.

Three-Phase Smart Current Transformer


