01Every asset
Fixed before it fails.
Vibration sensors and current transformers watch generators, elevators and pumps between maintenance cycles, alerting before breakdown.
For maintenance · engineering
Loading...
Facility management · IoTRICs
Water, energy, hygiene, safety and critical equipment, monitored on one IoTRICs dashboard. Maintenance moves from fixed schedules to actual conditions.

Illustrative portfolio. Readings and alerts are examples.
Failures found only after service is disrupted, leading to costly emergency repairs.
Staff-dependent checks across many locations, with no real-time visibility.
No view of consumption patterns, so inefficiencies go unnoticed for months.
Unauthorised access, water leaks and fire risks discovered too late.
Operations based on schedules and assumptions, not actual conditions.
Manual records make audits hard and sustainability reporting unreliable.
Toggle to see what changes when every asset reports to one platform, or tap any card to flip it.Toggle all six, or tap a card to flip it.
Nine solutions, one building
From the rooftop to the sewage well. Pick a system to see it live: what we measure, what the data shows and what changes.
1Solution 01
The problemWater is tested by hand at fixed intervals, so pH swings and contamination can build up between checks.
Our solutionContinuous sensors track pH, chlorine, temperature and turbidity, with alerts the moment a reading leaves its safe range.
2Solution 02
The problemDirty or degraded panels lose output unnoticed, and cleaning runs on a fixed calendar.
Our solutionCurrent transformers measure output per panel. A drop below baseline raises a cleaning or maintenance alert.
3Solution 03
The problemFilters clog silently, airflow and efficiency fall, and systems run on fixed schedules until they break down.
Our solutionHVAC sensors track filter clog and airflow, so servicing happens on condition, before failure.
4Solution 04
The problemBins are checked by hand on fixed routes. Overflow, heat and misuse go unnoticed, and collections are not verified.
Our solutionFill-level sensors with temperature monitoring track every bin, so collection follows real need.
5Solution 05
The problemLeaks and sewage overflow go unnoticed until damage is done, and daily pickups do not always clear the well.
Our solutionLevel sensors and leak detectors watch wells, tanks and cable manholes, with automated call alerts at thresholds.
6Solution 06
The problemCleaning follows a routine, not usage. Problems surface as complaints, and consumables run out before refill.
Our solutionPeople counters, odour sensors and consumable monitors drive cleaning by actual use.
7Solution 07
The problemEV bays are blocked by cars that are not charging, and underground car parks are exposed to flooding.
Our solutionEVOLTICS CPMS with parking sensors gives end-to-end visibility. Flood detection shuts chargers down automatically.
8Solution 08
The problemRefrigerant leaks cut cooling efficiency silently, and air-quality problems build up between manual inspections.
Our solutionSensors track air quality, CO₂, freon leaks and temperature anomalies, with automated alerts.
9Solution 09
The problemGenerators, elevators and pumps fail between maintenance cycles, and vibration changes go unseen.
Our solutionVibration sensors, current transformers and data acquisition watch equipment health, alerting before breakdown.
Week 0. New filter. AHU-2 airflow at 100%. Week 2. The filter starts to clog. Fans work harder. Week 7. Airflow below 80%. A maintenance alert is raised. Week 8. Filter changed on condition, not on the calendar. Week 12. The fixed schedule is only due now. 2,240 kWh already saved.
Illustrative AHU with a filter changed at 80% airflow, compared with a fixed 12-week schedule.
Our sensors
Hardware-agnostic: any brand, one dashboard. Existing equipment joins through our IoT and I/O controllers.

Indoor air quality and ventilation

Washroom and waste odour detection

Noise and acoustic event monitoring

Monitors current consumption

Spot leak detection under equipment

Server rooms and perimeter leak alerts

Tanks, wells and sewage monitoring

Tank, bin and reservoir fill levels

Occupancy and footfall analytics

Mobile equipment and asset tracking

Smart parking and EV bay detection

Mobile equipment and asset tracking

Bin fill monitoring and route optimisation

Dry-contact control for legacy equipment

Modbus device integration to the cloud

Door open and close monitoring
The 3C data experience
Intelligent sensing: temperature, humidity and air quality; energy, water flow and pressure; door access, motion and safety.
Robust transmission: cellular and fibre, LoRaWAN® for large sites, satellite and BLE for edge assets.
Cloud intelligence: real-time dashboards, automated anomaly alerts, predictive analytics and modelling.
Your rounds, in hours
Enter your own figures to see how many staff hours routine inspection rounds take. Live monitoring covers these checks around the clock.
Your figures, your calculation. Examples: meter and tank readings, pool tests, bin checks, plant-room walk-rounds. Not a promised saving.
Staff hours on routine checks, per month
600hours
At 160 working hours a month · 10 sites on one dashboard
What the data delivers
01Every asset
Vibration sensors and current transformers watch generators, elevators and pumps between maintenance cycles, alerting before breakdown.
For maintenance · engineering
02Every AHU
Consumption by system shows where energy goes, and condition-based filter changes keep airflow high and energy low.
For energy · sustainability
AHU-2 filter changed on condition: airflow back to 98%.
03Every washroom
People counters, odour and consumable sensors turn fixed cleaning rounds into usage-based service.
For housekeeping · soft services
04Every well
Level sensors and leak detectors watch sewage wells, tanks and cable manholes, with call alerts at thresholds.
For MEP · infrastructure
05Every plant room
Freon leaks, air quality and temperature anomalies raise automated alerts across every site.
For HSE · facility managers
06Every audit
Every reading is timestamped, with built-in carbon tracking and sustainability metrics.
For compliance · ESG
| Record | Source | This month |
|---|---|---|
| Pool water quality | Water sensors | Logged 24/7 |
| Sewage pickups | Level sensors | 30 verified |
| Bin collections | Waste sensors | 112 verified |
| Energy & carbon | Current sensors | Reported |
Widget readings are illustrative.

Every sensor in every facility reports to IoTRICs, on web and mobile, with automated alerts to the right person.


All facility systems on a single IoTRICs dashboard.
The right person hears about it first, including call alerts.
Trends and models spot failing equipment early.
Connect any sensor or device brand, with no vendor lock-in.
Built-in carbon tracking and sustainability metrics.
Your data anytime, anywhere, for every team.
Delivery model
Solution-as-a-Service (SolaaS) turns technology from a heavy capital purchase into a predictable, managed operating expense.
Capital expenditure becomes predictable operating expense.
We handle deployment, configuration, security patches and firmware updates.
From a single facility to a national network.
Always on the latest version, with new features deployed automatically.
Your data anytime, anywhere, on web and mobile.
Why Najhum





Yes. The platform is hardware-agnostic. The IoT controller brings Modbus devices onto the cloud, and the battery I/O controller adds dry-contact control for legacy equipment.
Any of the nine: pool water quality, solar panels, HVAC and energy, waste, water leaks and sewage, washrooms, parking and EV charging, fire safety and environment, and critical equipment. Most sites start with the two or three that cost them most today.
Automated anomaly alerts go to the right person as soon as a reading leaves its threshold, including call alerts for critical events such as a sewage well reaching its limit.
Yes. We choose the connection per site: cellular or fibre, LoRaWAN® for large sites, and satellite or BLE for edge assets.
Yes. Every reading is logged with a timestamp for audits, and built-in carbon tracking and sustainability metrics support ESG reporting and carbon credit participation.
As Solution-as-a-Service (SolaaS): a predictable monthly fee, fully managed by Najhum, that scales from one facility to a national network.
Pick the systems that cost you most today, see what the data shows, then scale across your portfolio.