Was the door left open?
Every opening, how long it stayed open, and doors left ajar.

Loading...
Supermarkets & grocery chains · IoTRICs
AI footfall counting at every entrance, and one wireless sensor network behind it. Know your shoppers, protect fresh stock and cut energy waste, store by store.



Illustrative store. Readings and timings are examples.
Excursions are found too late, and stock is lost.
Door left open, compressor fault or defrost? Nobody can tell.
Bills show totals, not which rack, HVAC unit or shift drove the cost.
No data linking visitors to staffing, promotions or conversion.
Paper logs for food-safety and pest-control audits.
No automated data for sustainability reporting.
Where it shows up: spoiled stock, energy bills, audit findings and missed sales.
What changes
Footfall & shopper analytics · NSV125
The NSV125 AI people counter sees the store entrance in 3D with two cameras. It counts every visitor in and out, then shows where shoppers go, how long they stay and what catches their eye.
Up to 4 counting lines, in and out. People who walk in and turn straight back are filtered out, so they are not counted twice.
Up to 4 custom zones per counter show how many people are in each area and how long they stay. Use it for queues, promotions and service desks.
Queue under 6 people
See foot-traffic intensity across the entrance and nearby aisles: the hot spots, the cold corners and the routes shoppers really take.
The counter detects which way visitors are facing, so you can see how often a display gets attention, not just how many people walk past it.
NSV125 AI people counter
Deep-learning AI with binocular stereo vision sees in depth as well as width, for accurate counts in busy entrances, day or night.

99.8%counting accuracy
GDPR-compliant. No personal data is transmitted, and you decide what can be previewed. The NSV125 reports counts and trends, never who someone is.
Footfall meets the till
Your POS knows the transactions. The NSV125 adds the visitors. Together they give each store a conversion rate. Try your own figures.
Your figures, your calculation. Nothing here is a promised result.
Store conversion rate
40.0%
24 more transactions a day, at 30 trading days a month
18:00. Cold room 2 holds steady at 2.8 °C. 18:42. A delivery leaves the door open. 18:48. Past 5 °C. The store manager gets an SMS. 18:55. Door closed. The compressor works hard to recover. 19:27. Back to 3 °C. Logged: door open 13 minutes.
Illustrative evening for one walk-in cold room with a 5 °C limit.
Three sensors on every cold room
An alarm only says something is wrong. Together, these three show why.
Every opening, how long it stayed open, and doors left ajar.

Inside every chiller, freezer and cold room, with an alert the moment it leaves its safe range.

A clamp on the supply shows compressor load and cycling, live. Non-invasive and self-powered, fitted with no shutdown.

The smart store
Six zones, one wireless network, no cabling. Pick a zone to see what watches it.

1Chillers & freezers
A T&H300 in each chiller and freezer reports every few minutes and alerts staff the moment a unit leaves its safe range.

2Walk-in cold rooms
Temperature, door and compressor load on the same timeline, so IoTRICs can tell a door left open from a failing compressor or a defrost.

3Entrance
The NSV125 counts visitors in and out with 99.8% accuracy, day or night, separating adults, children, groups and staff. No personal data is transmitted.

4Sales floor & bakery
Nine indicators of comfort and air quality on one wall-mounted sensor, with presence sensing for staff areas.

5Plant room
Clamp-on sensors on refrigeration racks and HVAC, existing Modbus meters brought online, and tank levels for generator diesel and water.

6Back-of-house
Rodent activity detected 24/7, not just catches, and a leak strip that alerts at the first drop.
The same method in every store
The right sensor where the risk is: sales floor, cold rooms, plant rooms and back-of-house.
The right connectivity for each use case, chosen per site and per room.
One IoTRICs dashboard with alerts, reports and mobile access for every team.
Size it for your chain
Enter your stores and equipment to see how many sensors a cold-chain rollout takes, and how many readings it logs.
An estimate from your inputs: one T&H300 per chiller, freezer and cold room; a door sensor and current clamp per cold room; one counter per entrance. Final quantities come from the site survey.
Wireless sensors across your chain
1,080
At one reading every 5 minutes · 20 stores on one dashboard
What the data delivers
01Every entrance
The NSV125 at each entrance shows visitors per hour, so rosters, promotions and conversion follow real traffic.
For store operations · marketing
02Every chiller
Each chiller, freezer and cold room reports every few minutes. Staff are alerted the moment a unit leaves its safe range.
For store managers · QA
03Every excursion
Temperature, door and compressor data together show the cause: a door left open, a struggling compressor or a normal defrost.
For facilities · maintenance
04Every circuit
Clamp-on sensors meter each refrigeration rack, HVAC unit and lighting circuit, installed with no shutdown.
For energy · finance
Metered per rack, unit and circuit with NCTx clamps, ±1%.
05Every floor
Nine indicators of comfort and air quality across the sales floor, bakery, hot-food and produce areas.
For facilities · customer experience
06Every audit
Timestamped temperature, door, pest and leak records, ready to export for any inspection.
For QA · compliance
| Check | Source | Today |
|---|---|---|
| Temperature log | T&H300 | Complete |
| Door events | NEM300 | 14 logged |
| Pest activity | NT400 | None |
| Leaks | STLD | Dry |
Widget readings are illustrative.
Beyond the cold chain
The same network and dashboard carry back-of-house risks, energy control and EV charging at the car park.
Pest activity, water leaks and low tank levels are usually found too late. Each gets its own wireless sensor, with an audit-ready history.



Scheduled, remote and occupancy-based control, with existing meters and refrigeration controllers on the same platform.


Najhum supplies, installs and runs EV chargers at store car parks, managed end to end on EVOLTICS. Shoppers stay longer where they can charge.
IoTRICs in action
Every sensor in every store reports to IoTRICs, Najhum’s hardware-agnostic cloud platform. On web and mobile, for store, facilities and QA teams.


All stores and distribution centres in one place.
SMS, email and push to the right person.
Trends spot failing equipment early.
Timestamped logs, ready for any audit.
Automated energy and sustainability reports.
For store, facilities and QA teams.
SolaaS engagement model
With Solution-as-a-Service (SolaaS), sensors, gateways, the IoTRICs platform and support come as one subscription. Installation is quoted separately, and large projects can choose PaaS.
Walk a flagship store and distribution centre, and agree the priority use cases.
Sensor plan, connectivity and SolaaS pricing for the chosen use cases.
Wireless installation with no store downtime, and IoTRICs training for store teams.
More stores and distribution centres on the same subscription.
About Najhum















No. The sensors are wireless and battery-powered, and the current clamps fit around existing circuits with no shutdown. Installation runs with no store downtime.
Yes. IoTRICs is hardware-agnostic, and the NT100 controller brings existing Modbus meters and refrigeration controllers onto the platform alongside the new sensors.
By SMS, email and push notification to the right person. Every team sees the same live data on web and mobile.
Up to 99.8%. It combines deep-learning AI with binocular stereo vision, counts in both directions on up to 4 lines, and filters out people who walk in and turn straight back.
No personal data is transmitted. The NSV125 is GDPR-compliant and reports counts and trends, never who someone is.
Yes. Staff detection keeps employees out of visitor counts, and the counter also separates adults from children and counts groups.
Several NSV125 counters can work together as one, covering wide entrances, malls and multi-entry stores without gaps.
Yes. You get continuous, timestamped temperature and door records, plus digital pest and leak history, ready to export for inspections.
Sensors, gateways, the IoTRICs platform, batteries, firmware and support, for one monthly fee. Installation is quoted separately, and large projects can choose PaaS instead.
With a discovery workshop: we walk a flagship store and distribution centre with your team, agree the priority use cases, then propose a sensor plan before rolling out across the chain.
See what the data shows, then roll out across the chain on the same subscription.